Top 10 Best Framing Nailer for the Money in 2020 And Beyond

In previous decades, jobs like woodwork and framing were left at the hands of professionals only. But with the advent of the internet and advanced online tutorials, these jobs, as well as framing, has become a piece of cake. YouTube allows us to make our wooden imaginations come to life.

Such projects can be done easily if we have the right equipment for it. A framing nailer is one such example. It turns the annoying labor of nailing into an easy job that takes a few seconds.

If you are looking for the best framing nailer, you have come to the right place. We will tell you all you need to know about framing nailers.

So, let’s start!

Our Picks of the Best Framing Nailer

If you’re lost in the sea of framing nailers then here are ten framing nailer reviews that are currently ruling the market.

  1. NuMax SFR2190 21-Degree Framing Nailer

Weather, you are a professional or an amateur, you’re going to love this product. Thanks to its advanced features and well-thought design it is currently one of the best in the market.

Starting from its body which is highly durable and strong to its handle, everything is made in such a way that it is easy to hold the device without getting fatigued. The device is fully ergonomic. But there is a no-mar safety tip that will prevent any accidental damage to the surface you’re working on.

The magazine has a capacity of 55 pcs with pull back pusher which makes loading a very easy and quick process. The cap on the magazine is anti-dust which means that dust won’t be able to enter and affect its performance.

It is a cost-effective machine with adjustable depth of drive. The magnesium body adds to the strength that you will find very rare in the market. This allows you 3 gallons of capacity inside it.

  • Lightweight Durability

The body is constructed with magnesium. And as we have learned in our chemistry classes that this is one of the lightest materials that give us the best protection.

  • Trigger Type

It has a dual-mode trigger which means, you can nail on intermittent mode as well as bump shooting.

  • Nail Type

The nail type compatible with this framing nailer must be full round head nails from 2″ to 3.5″ size, 10 to 12 gauge and plastic collated with 21-degree collation angle.

  • Source For Power

It uses an air compressor as an external power source.

Pros

Cons

Frequently Asked Questions

Q: What kind of air compressor does it need?

A: It needs an air compressor which can provide at least 70 to 115 PSI air pressure. The capacity should be 3 gallons, and it should be able to have 1.5 CFM at 90 PSI.

Q: What brands of nails does it need?

A: It can work with nails of any brand if they are complying with the description above.

2.  BOSTITCH RN46-1 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer

This versatile coil roofing nailer can be used for various purposes starting from roofing to the installation of vapor barriers or exterior drywall. With the help of this tool alone, you can complete your job without any problem. Thus it saves you a lot of money.

It is well made with a highly durable material along with skid pads for wear resistance. The magazine in this tool has a capacity of 120 nails. Its patented canister features one-step loading tanks. The tool is lightweight and easy to grasp because of its over-molded grip.

  • Body

It has a sturdy but lightweight aluminum body with carbide tips that grant it increased durability as well. The reason for choosing such material for its construction was to make it as strong as possible without making it heavy.

  • Trigger Type

The trigger for this device is sequential, i.e. it doesn’t burst out nails; instead, it fires the nail one at a time upon contacting the trigger.

  • Nail Type

The nails must be full round head nails with 0.120 shank diameter and a length from 3/4 inch to 1-3/4 inch. It has a collation angle of 15 degrees with a diamond point and galvanized or stainless-steel finish.

  • Source For Power

It is a pneumatic type device using an air compressor for its power.

Pros

Cons

Frequently Asked Questions

Q: What kind of air compressor does it need?

A: It needs an air compressor which can provide at least 70 to 120 PSI of air pressure. It should provide 410 inches per pound force at a pressure of 100 PSI.

Q: What brands of nails does it need?

A: You don’t need any specific brands of nails for this device to work.

3.  Hitachi NR83A5 3-1/4″ Plastic Collated Framing Nailer With Rafter Hook

This product is designed for comfortable and accurate nail delivery. The handle attached to the cylindrical body has non-slip rubber on it that helps to provide a better grip and comfort. This makes working with an instrument like this such an easy task.

It has an easy-to-load magazine which can be loaded from the top with 64 nails at one time. The two-piece magazine can withstand the working conditions of a usual construction site.

This device weighs nine pounds which can be a little heavier sometimes but we must remember that this extra weight prevents the bouncing back of the tool while working.

  • Body

It has a sturdy cylindrical body that is perfect for functions like roof decking and wall sheathing. The shape considerably increases the durability and decreases the response time.

  • Trigger Type

Sequential trigger on this device is operated by selective actuation which makes nailing more precise and accurate.

  • Nail Type

It works with nails of 2 to 3.25 inches length and 0.113 to 0.131 inches diameter with a full rounded head. The magazine angle for such fasteners is 21 degrees which are the most accurate angle.

  • Source For Power

The power source for this handy device is an air compressor, which should work on 70-120 PSI pressure

Pros

Cons

Frequently Asked Questions

Q: What brands of nails does it need?

A: It can work on nails which are collated with plastic. Follow the length and dimensions provided by the company.

Q: Do I need to buy a separate tool for depth?

A: No, it provides the tool-less depth setting.

4.   Estwing EFR2190 – 21-Degree Full Head Pneumatic Framing Nailer

Estwing EFR2190 is a professional device that can be used for a variety of purposes from wood fencing to sheathing etc. It has an ergonomic grip that provides a good hold of the device without slippage. It even has a rafter hook attached for ease of the user.

It has a magazine with a capacity of 60 nails with the strip-type load and an anti-dry-firing feature which prevents the device from working if there are less than five nails in the magazine thus protecting it from harm.

  • Body

The body is made up of strong and tough magnesium which makes this tool lightweight without compromising on the strength. There is a no-mar tip that prevents any damage to the surface it is working on.

  • Trigger Type

The trigger is a dual functioning trigger with bump firing mode for fast nailing and sequential mode for a slow but precise job; the choice is yours.

  • Nail Type

It is compatible with fasteners of 10-12 gauge and  2-3.5” inches length. This accepts 21-degree plastic collated full round head framing nails.

  • Power Source

This handy device harnesses its power from an adjustable exhaust port air-powered compressor that can provide 70 to 115 PSI pressure.

Pros

Cons

Frequently Asked Questions

Q: Can it work at 22-degree magazine angle?

A: Although the most suitable angle is 21 for this device, it can work on a range of 20 to 22 degrees.

Q: Do I need to buy a separate tool for depth?

A: You don’t need to buy an extra tool for depth adjustment; the device itself provides the customized depth adjustment settings.

5.   3PLUS H2190SP 21-Degree Full Round Head Framing Nailer

It is a perfect choice for people who need a nailer for occasional use. This gives you efficient performance in a low budget.

The product is designed to serve you in all weather conditions. It is constructed with tough and durable materials. Due to this reason, it might be a little heavier, but this heaviness can prevent the jerking back of the tool for first time users.

Multi-directional exhaust enables you to direct the exhaust air away from yourself and thus ensuring the safety of your eyes. Toe nailing can easily be prevented thanks to the spike tip on this tool. The magazine is quite wide and sturdy thanks to the aluminum construction.

  • Body

The materials used for its manufacturing are aluminum, steel, and rubber. All three of these make sure that it provides you with the best nailing experience possible.

  • Trigger Type

It can only fire the nails upon sequential actuation with a trigger which delivers precise firing.

  • Nail Type

The gun fires at 21-degree and 2 to 3.5 inches plastic collated full round head fasteners are compatible with this tool.

  • Source For Power

Air-powered compressors that can provide 70 to 120 PSI pressure are the perfect power source for this device.

Pros

Cons

Frequently Asked Questions

Q: Does it have a no-mar tip?

A: Yes, it has a no-mar tip so you can work on sensitive surfaces without having to worry about surface damage.

Q: Do I need to buy a separate tool for depth?

A: You can customize the depth according to your liking with this device. No need to buy an extra tool.

6.  DEWALT DCN692B 20V Max XR Brushless Dual Speed Nailer

This is a battery-operated cordless nailer, so you won’t need extended wires along with an extra air compressor to make it work. Just put the batteries in and start working.

Although the tool is quite light in weight, it has an attached rafter to make it more convenient for the user. Its magazine can hold 55 nails through rear loading. In case of any jam, you can easily access the nose piece for the removal of the faulty nail.

It has an anti-dry-firing mechanism that inhibits the machine to fire without any nails in the magazine. The dual system allows the nails with different lengths to be fired by the device, customizing the depth all along without any extra tool.

  • Body

It has a body made of aluminum which keeps it light without losing the necessary strength.

  • Trigger Type

Choose the trigger type yourself in this dual-mode device. Use bump firing mode for rapid but less precise work. Otherwise, use sequential firing for precise shooting.

  • Nail Type

It is compatible with full round head nails of 3.5 inches and 0.113 to 0.131 diameter. The nails should also be paper collated with 33-degree collation angle.

  • Source for power

It is a battery-operated tool. You don’t need an air compressor to make it work. The initial voltage is 20 after that it can work on an optimum voltage of 18 volts as well.

Pros

Cons

Frequently Asked Questions

Q: What kind of battery does it work on?

A: This battery-powered tool can work on any battery with a minimum of 20V voltage.

Q: Does it have a no-mar tip?

A: A no-mar tip is included in the packaging to give you error-free work.

7.  Freeman PFR2190 21-Degree Full-Head Framing Nailer

Whether you are a professional or a weekend woodworker, this tool is perfect for everyone. This is easy and effective both at the same time.

It has an aluminum magazine which is lightweight and sturdy and can hold 55 nails in it at one go. The 360-degree exhaust is there so that you can adjust it accordingly.

Although the body is strong enough, still it comes with a plastic casing for further protection from accidental falls, etc. It is a versatile framing nailer and has various uses. The Teflon O rings provide stability as well as sustainability to the tool.

  • Body

The body is made up of magnesium which enhances the strength of the nailer while keeping it sturdy and lightweight. This enables it to withstand terrific circumstantial conditions.

  • Trigger Type

There is a two-way trigger with both options for quick-fire as well as single-shot nailing. It’s up to your requirement.

  • Nail Type

The nails must be full round head nails with 8 to 10 gauge and a length from 2 to 3.5 inch at a collation angle of 21 degrees with plastic collation. It can even work on ring shanks.

  • Source For Power

The power source for this amazing nailer is an air compressor which can provide a pressure of 60 to 115PSI.

Pros

Cons

Frequently Asked Questions

Q: What are Teflon O rings for?

A: Teflon O rings are for internal sustainability and High performance.

Q: Does word with toenailing?

A: You will have no problem working with toenails.

8.  BOSTITCH F21PL Round Head 1-1/2-Inch To 3-1/2-Inch Framing Nailer

It is a two in one tool with two interchangeable nose pieces that can be changed according to the need. One of them is for framing nailer while the other one converts this tool into the metal connector. So, you don’t have to spend extra on a metal connector.

This device will assist you in framing, sheathing, wood, masonry, and even strapping, etc. It also has an Adjustable rafter hook which can facilitate the user a lot.

The magazine for this type of nailer is a bottom load magazine with almost 60 nail space in it. There is a ¼ inch NPT fitting type as well.

  • Body

The body is made up of lightweight magnesium which is sturdy and is fully protected by rubber skid pads. You will also find rubber grips as well which helps the user grab this tool firmly.

  • Trigger Type

Bump firing and sequential firing, both are possible with this tool. This along with interchangeable noses make it the most versatile and the best framing nail gun in the list.

  • Nail Type

Two types of nails can be used in this tool. For framing nails, the length should be 2 to 3.5 inches and they should be plastic collated with a 21-degree angle. For metal connector nails the size should be 1.5 to 2.5 inches of length.

  • Source For Power

The power source for this amazing nailer is an air compressor which can provide a pressure of 60 to 115PSI.

Pros

Cons

Frequently Asked Questions

Q: What kind of air compressor is perfect for it?

A: The one which can provide 1050 inch-pound driving power.

Q: What brand nails should I use for this tool?

A: HurriQuake nails are perfect to go with this tool. But you can use almost all nails available in any general hardware store.

9. Paslode – 905600 Cordless XP Framing Nailer

Paslode – 905600 Cordless XP Framing Nailer shows 15% more power, strength, and efficiency than any other framing nailer. It can put a nail on a hard floor smoothly.

This works at a range of different temperatures from low to high. In winters, it can even work at a low temperature of 14°F. Even though it is quite lightweight, the manufacturers have included belt hooks for further ease of the user.

It has a compact design that can work perfectly fine in closed space areas where space is an issue or places where you can’t work with an air compressor. As it operates on battery, there is no need tangling in wires.

  • Body

The major housing material is plastic while the body is made up of strong metal. This combination results in lightweight effectiveness. Stainless steel magazine improves loading.

  • Trigger Type

Interchangeable bump, as well as the single-shot trigger, can be used in this device.

  • Nail Type

The fastener for this tool should be 30-degree paper collated nails with 0.113 inches diameter and a length of 2 to 3-1/4 inches.

  • Source For Power

The main source of power is the 7 volts lithium-ion battery with 1.5 hours recharge time.

Pros

Cons

Frequently Asked Questions

Q: How fast can I work with this device?

A: It can shoot 2 nails per second on average.

Q: How many times do I need to charge it?

A: This is an energy-efficient device. For a 2-minute charge, you can shot 200 nails while when charged completely it can shoot 9000 nails.

10.   BOSTITCH F28WW 2-inch To 3-1/2-inch Framing Nailer With Magnesium Housing

BOSTITCH F28WW is a reliable good quality nailing gun that can be used for a variety of purposes given that it has proper lubrication. You can keep it smooth with general lubricating oil. It also features an NPT fitting type and a non-marring tip.

It works on a pneumatic power source such as an air compressor with 80 to 120 psi operating pressure. The magazine is the most distinctive feature of this device as it can hold 100 nails at one time.

  • Body

The major housing material is magnesium. This metal gives the tool a sweet finishing and great looks.

  • Trigger Type

You also have two options here: single-shot sequential firing for precision but slow nailing and bump fire trigger for fast shots.

  • Nail Type

28-degree wire collated fasteners with 2 to 3.5-inch length is perfect for this tool.

  • Source For Power

An air compressor which can provide 1050 pounds per inch driving power to the tool is perfect.

Pros

Cons

Frequently Asked Questions

Q: Does it need a male thread housing?

A: Yes, it does.

Q: What is the magazine capacity for this one?

A: Its magazine is quite larger than other such tools and can hold 100 nails at a time.

Features to Consider Before You Buy Framing Nail Gun

As you are looking for a framing nailer, we can understand that you have a good idea about the tool. Yet, unless you are a handyman guru, you must be lacking some features to look for in this product. Either way, a list is always helpful.

So, here is the list of essentials you need to look for.

Power Source

The power source is an important aspect of such a tool and it should not be taken lightly. You will find two power sources in the market. They are-

  • Pneumatically powered
  • Battery-powered

Pneumatic source comprises an external air compressor that can provide a certain pressure to the tool. It is better than the battery in terms of power but its biggest disadvantage is its cord and that you need to have an extra air compressor.

Also, the battery-operated devices don’t depend upon an external source as they have their own chargeable batteries that provide the necessary power.

Collation Angle

Collation angle is the angle at which the nails are collated in the magazine. Why is it important?

Well, higher the collation angle, higher are the chances that the device can work in small and compact spaces. So, if you’re planning to work in small spaces then look for high collation angle. 21 is the optimum angle, but you can also find tools with angles as high as 30.

Rafter Hook

Though it might not seem as important as various other factors in this list, if you have a tool with rafter hook you will thank the manufacturer for your fatigue-less hands.

Magazine

The magazine is an important aspect of a nailing gun, make sure that the device you’re going to buy has an easy loading magazine with good capacity. If the capacity is low, then you have to fill the magazine, again and again, that can be pretty annoying sometimes.

Weight

Weight is by far the most crucial feature of this tool. When we are working, we want all of our focus and energy on the work. But if the tool is heavy, it might become difficult for you to work properly. Bulky devices can also result in sore arms. So, make sure that the tool you’re going to buy is light in weight.

There is a little catch though. A heavy device has less chance to bounce back while working, so keep this factor in mind as well.

Depth Of Drive

When nailing in a particular structure, it is very important that we know how much deeper we want to place the nail. That is why it is necessary to buy a nailer capable of measuring the depth of drive. Otherwise, you would have to buy an extra tool alongside the nailer to measure the depth.

Portability

Buying an easily portable device is essential. Otherwise how else would you use it?

A mobile tool should be small in size and light in weight. Nobody likes a massive tool with a lot of weight as it can be challenging to handle. So make sure that you’re checking the measurement of your device before buying it.

Trigger Type

Deciding a trigger type for your device is of significant importance. Here are the triggers you will come across in the market.

  • Bump: Such triggers fire a continuous shot at a very fast speed and are thus required for work that has to be done quickly without extreme precision.
  • Single-shot Or Sequential: This type of trigger fires one shot at one time upon accentuation and is required when we want our work to be very précised.
  • Dual Trigger: Such devices have both types of triggers, and you can change the trigger depending upon your use.

Anti-Dry Fire

Sometimes, a tool can fire the shot without any nail, this is called a dry fire, and this can be harmful to the device as well as the surface you’re working on.

So, make sure that you’re buying equipment with an anti-dry fire mechanism. These prevent you from firing dry and alerts you when the nails in the magazine are finished.

Warranty

Since it is a heavy tool which can be quite expensive and you’re going to use it in an environment where there is a lot of chance of accidental falling, you ought to make sure you check the warranty of the device before buying and make sure to buy the one that is offering a good warranty.

Frequently Asked Questions (FAQs)

Here are some common questions that might be in your mind before you buy your framing nailer.

Q: Which trigger type is better for me as a beginner?

A: As a beginner, you should work with a sequential trigger as it is more accurate and easier to use and there is less room for error.

Q: Can I use the nails I currently have in my house?

A: It depends upon the nailer you’re using. If the nails match the fastener requirement of the nailer, you can use them and otherwise, you have to buy new nails.

Q: Is it important to buy a nailer with a no-mar tip?

A: Yes, no-mar tip protects the surface you’re working on, from any damage so it is important to look for a nailer with no-mar tip.

Q: Which is better, round head or clipped head?

A: Roundheads are certainly the better option. Clipped heads are becoming harder to find and are not allowed in many areas. Roundheads have lesser weight than clipped heads.

Q: What to do if my tool gets jammed?

A: if you don’t have anti-jam technology in your nailer than you have to do it manually. Open your magazine or barrel up and then find the jammed nail and get it out of there. You might have a release button that will make the job easier.

Q: Do all nailers need an extra air compressor to work?

A: No, the battery-operated ones don’t need an air compressor to work.

Q: How much PSI do I need?

A: It depends on the requirement of the tool you’re using. Most of them need 70 to 120 PSI.

Q: Can I use a finish nailer for framing?

A: Yes, you can, but finish nailers are mostly used for small projects while framing nailers are for large wood projects.

Final Words

NO matter if you’re a professional woodworker or an occasional DIYer, if you need the best framing nailer, then take a look at the list provided above where we have reviewed 10 of the very best such tools according to their versatility and features.

If you are still confused, then we have chosen three best framing nailer from our list that should surely pique your interest:

  • BOSTITCH F21PL- pneumatic; two in one; affordable
  • Paslode – 905600 battery-powered; lightweight; easy to use
  • Freeman PFR2190 21 pneumatic; highly efficient; versatile

Leave a Comment