Best Finish Nailer Reviews | The Ultimate Buyer’s Guide

Save yourself from the brutality of the finger-smashing possibilities, and some time too. If you have a lot of nailing work to do, get a finish nailer and just get it all done in no time at all. We have gathered here a lot of information so that you can learn about these nailing guns and choose the best finish nailer in the market for yourself. 

As a professional, you will need a finish nailer in order to tackle the flow of work and get your projects done with efficiency and accuracy. 

And as per domestic use, it would be wise for you to keep a finish nailer at home because these are versatile tools that can be very useful for quite a number of regular jobs at home, whether on concrete or on wood.

What Is A Finishing Nailer Used For?

Finish nailers are used to drive in nails through things in order to hold them together. You can use these to finish roofing, framing,and a plethora of other tasks. In carpentry, these are a necessity, while in domestic holdings, these will be especially useful. Basically, these are a substitute for the good-old frightening hammers.  

These machines have the capacity to push very hard and thick nails into wood, brick, or concrete. However, finishing nailers are usually used with very short, light gauge nails for trim work, baseboards, paneling, setting up baseboards, putting crown moldings, and so on.

Even if you are a home user, it will be useful for you to keep a finish nailer around the house because you will be able to fix materials immediately, instead of depending on a professional carpenter who will charge you a lot of money for simple tasks.

Benefits of Using A Finish Nailer

Still not sure about the purpose of a finish nailer? Well then, let us give you some more details here.

  1. Save Your Fingers from Getting Smashed

Didn’t you always have that cringing fear when you see someone hammering down nails, that they will smash their fingers with the blunt steel of the hammerhead? Well, there is a good possibility of that happening if you use your hands and a regular hammer.

  1. Work Faster

You will get the work done faster because you won’t have to worry about your fingers anymore. Also, machines are just generally faster than humans, aren’t they? For faster and more accurate work on your wood, concrete or brick, get a finish nailer.

  1. No More Nails Will Be Lost

With a finish nailer, all the nails are fed into the machine and shot automatically into place. This is less hassle for everyone since you won’t have to carry around nails with you. Just put it all inside the nailer and just punch them in to get the work done.

  1. Fun and Easy

Fix the area you want to work on, and then just point and shoot! As you can already tell, this is pretty fun stuff. This device saves us the tedious trouble of nailing and makes it a fun game of shooting nails into things.

  1. More Accurate, More Efficient

When nailing manually, you will be very likely to miss several times and hit other areas (fingers included). But with a finish nailer, you will just have to point and shoot. And not much can really go wrong here. 

After you are done, not only will you be surprised at how fast the job was done, but you will also be in awe at the efficiency and the accuracy with which the nails have been driven into place.

Overall, we’d say that if you have any nailing job to do at home, it is better to buy a finish nailer instead of risking the hazard of getting your fingers bashed in. And this is especially true for you if you are a beginner. 

Top 13 Best Finish Nailer Reviews

There are many nail guns in the market, and they all look equally confusing. Someone who has not done much research about this will feel especially lost with all the options.

We have, therefore, compiled a list of the best ones available in the market right now. Take a look, we are sure that it will give you some new information.

1. Hitachi NT65MA4 1-1/4 Inch To 2-1/2 Inch 15-Gauge Angled Finish Nailer With Air Duster

This 15-inch finishing nail gun is one of the top-grade ones in the market. It is very effective in lodging base and crown moldings, door, and window casings, as well as exterior trims, staircases, and cabinets.

A huge advantage of buying this device is that it can reach tight corners in tricky areas. The angled head is designed specifically for this purpose.

You have the liberty to use nails that range in size from 1-1/4 to about 2-1/2 inches. A total of 100 nails can be put into this device at once, and thus with this, you will be able to work for a long time without having to waste time on refills.

Another thing that makes this device user-friendly is that the machine weighs only about 4.2 lbs. This means that you will be able to hold and use it for a long time without being bogged down by muscle fatigue. There is a tool-free feature for adjusting the thickness of the nail gun with the size of the nails.

Now, when you’re done working, you have to clean the area, right? Let the machine help you. There is an exhaust portal on this machine that helps to remove the residue off of the workspace and keep everything squeaky clean. What happens if a tiny nail falls into the machine and clogs up the system? Well, don’t worry.

You won’t have to take it to the repairman just for this. The device has an in-built nail extraction system made just for such instances. This is also a tool-free feature installed within the machine, which will release and remove the clogged nail from the nail cap and keep things running just as smoothly.

Moreover, this feature is particularly helpful because getting the nail out to fix the jam without it is a very troublesome process. Mode switching is easy too. No tool or extra fuss is required to switch from the sequential nailing mode to the contact nailing mode.

There is a selective actuation switch that allows you to make the shift with a push on a little button. Then use the tool-less depth dial to fasten the device onto the material for better control and a cleaner finish.



2. Freeman P4FRFNCB Framing/Finishing Combo Kit

This device comes with a lot of attachments including four Pneumatic nailers that can handle all sorts of finishing and framing tasks with ease. You will get a finish nailer, a crown stapler, a framing nailer and a brad nailer.

All of this will be provided to you in a canvas bag, conveniently modeled for carrying everything without any bother. This is an all-rounder kit that will really give you everything you need in order to get your work done.

With such a huge range of tools at your disposal, nothing will come in the way of your artistry. Get your hands on everything, whether it be heavy-duty work like fencing, roof decking, sub-floors and pallet building or detailing work like crown molding, cabinetry, baseboards, trim work or casings, and so on.

For each type of work and each tool head, you will need to use nails of different sizes. And for each type of nail, you will just have to adjust the depth of the gun so that it the nails can firmly lock into position before being shot into the workpiece.

Also, keep all the adjustment controls working smoothly by oiling the ridges regularly. An air duster is installed in the machine in order to clear all the dirt and dust away from the workstation before and after the work.

The companyFreeman is committedto forming lasting bonds with its customers. If you want durable tools that will stick around for centuries, then you opt for this durable one. The company follows strict guidelines to ensure that the quality of their tools is always top-notch.

These tools are fit for professional work, as well as for projects at home. But be careful with the gun, never look directly into the barrel while the nails are inserted.



3. Senco 4G0001N FinishPro 42XP 15-Gauge 1-1/4-Inch To 2-1/2-Inch Finish Nailer With Case

With the highest rate of customer satisfaction, this finishing nailer is undoubtedly among the best in the market. The company, Senco, has made products in the past that can be termed as thebest finish nailer for the money.

Quality, comfort, and durability are their forte. The device 4G0001N FinishPro is made with magnesium, which is a lightweight and durable material that makes the machine sturdy enough to pack a lot of power and strength.

The position of the trigger is also a comfortable distance away from the nozzle so that it is easier to target and shoot. An EZ-clear technology displaces nails that might have gotten stuck and assists in keeping the machine running smoothly.

Also, this machine doesn’t need the occasional oil massage to run efficiently. The zero lubrication will help you to keep things clean because you won’t have to deal with any messy oil spills. Just use a dry cloth to keep the external dust away, that’s all.

Now, the dust from usage will be cleaned by the 360-degree rotational exhaust portals that are inside the machine. There is a belt-hook around the machine, which will help you to hang the gun up on the wall when it is not in use.

Furthermore, the machine can handle 15-gauge brad head finishing nails that are in the range between 1-1/4 to about 2-1/2 inches. It is ideal for lightweight trim, and regardless of the material worked upon, the finish is consistently flawless.

You can put in about 104 nails at a time and work at a long stretch. The device weighs only about 4.7lbs which is pretty comfortable to work with. On top of that, additional comfort is provided by the rubber-gripped handles.



4. Hitachi NT65M2S 16-Gauge Finish Nailer With Integrated Air Duster

Working with this device is going to be a very comfortable task for you. You will have the freedom of modifying the settings as you desire. Starting from the depth of the drive dial to the exhaust port, everything can be modified to suit your needs.

This 16-gauge finish nailer will accept nails that vary between 1 to 2-1/2 inches. You will be able to use the machine right out of the box.

Set the compressor to 85 lbs, load 15-gauge nails into the gun and just jump right into it. While working, if any nail gets stuck, just use the tool-less nose to extract the nail and restart the machine.

The device is very lightweight, it weighs only about 3.7 lbs, which strikes a very good balance that lets you maneuver the device with the greatest comfort, and it also allows you to work for long hours at a stretch without any muscle fatigue. Moreover, the handles are wrapped with elastomer, which makes your grip firm and secure.

And as you gain more confidence in your grip, you will always find yourself giving your best efforts into the task. To switch from one mode to other, simply use the flip actuation switch for smooth transitions. There are two modes you can work with- one is the bump fire mode and the other is the sequential fire mode.

In bump fire mode, the gun will automatically shoot into the material if you pull the trigger while the tip of the gun is in contact with the target area. In sequential fire mode, the nose will have to be depressed deep into the material before the trigger can be pulled to shoot.

Be careful while you do this because the gun might shoot into your hand or any other area that is in its target line if the trigger is pulled at the wrong time by accident.



5. BOSTITCH N62FNK-2 15-Gauge 1 1/4-Inch To 2-1/2-Inch Angled Finish Nailer

If you have any kind of detailing on your mind, then you might be looking for a tool like this. This finishing nailing gun is specially designed to go into the intricate details of intricate designs and put everything together.

Starting from windows, doors, to crown molding or detailed work on furniture, you can accomplish it all by using this nailer to add trims and moldings.

You will need to pair this up with a standard air compressor, and voila! You’ll be all set for work. This nailing gun works smoothly without oiling, which should be a great relief to you if you are aware that the oil sometimes leaves stains on the workpieces.

So,keep your furniture fresh and dry, while getting beautiful work done on them simultaneously. In order to get the best out of this device, use a four-angled profile tip to ensure that you have the right material to work with.

The angled tip will reach into all the difficult corners and give you the highest satisfaction and freedom in creativity.

Also, the depth drive on the tool can be adjusted so that you can use nails of any measurement. You will have the flexibility of an operating range of 70-120 PSI; therefore, you will be able to work with nails of any size you want.

This tool is very powerful, and you can use the brute force of a complete 400lbs to drive 15-gauge nails right into the hardwood without hurdles.

Additionally, to keep the area clean, the device comes with an air duster button integrated into the body. This allows air to pass through and pass out from a small hole in the side of the nailer and keep everything tidy. Turn this option on before and after work to keep your workplace neat.

Don’t worry about getting scratches on the table or area you work in because the no-mar tips will protect the surfaces from getting scratched on.



6. PORTER-CABLE PCC792LA 20V MAX Cordless Lithium 16GA Straight Finish Nailer Kit

Who likes to walk around with strings dangling behind them? No one likes hassle during work. But unfortunately, nail guns are usually corded devices. The Porter-Cable PCC792LA is an exception to this though. It is a cordless device that makes life quite easier for busy workers.

Don’t worry, you won’t need to compromise on power. This cordless device here runs purely on battery power and does not disappoint at all.

The device weighs about 6.5 lbs, and although it is not the lightest tool in the market, it definitely is one of the most capable. Running on a powerful 20V lithium battery, this machine has the capacity to drive a set of 100 nails at a stretch.

Pretty good for a battery-driven tool, isn’t it? This machine has most of the features of a corded electric finish nailer, and so it is one of the most sought out nail guns in the market.

It has a lot of tool-free settings, for example, a depth-adjustment window, a tool-free depth-adjustment wheel, a tool-free release lever, and a tool-free jam release, all for the comfort of your craftsmanship.

User safety is ensured through and through. This also works to boost up productivity and to ensure that you get all the work done efficiently.

Moreover, the motor can feed enough power into the machine so as toensure that a worker can consistently fire nails into materials of any type or thickness. In terms of the nail-size capacity, you can use nails that measure up to about 2-1/2 inches.

And another great feature of this tool is that it comes with L.E.D lights that can be used to illuminate tricky corners of the workpiece in order to work with greater precision.



7. BOSTITCH Finish Nailer Kit, 16GA, Smart Point (BTFP71917)

This finish nailer kit comes with a nailer, sample fasteners of 1/4 inches, and extra no-mar tips, all of which is contained in a bag for easy storage and conveyance. You will be able to use nails that range up to 2-1/2 inches in size.

In order to ensure that the nails are properly held into place, use the dial depth control and adjust the diameter until they meet the size of the nails. This will give you more precision and control so that you can get more freedom in using the machine.

The machine works with the smart point technology, which makes it easier for the machine to place the nails correctly onto the target area. Also, the precision is higher because the machine has a small nose which does not need to be compressed for the tip in order to come within full contact with the surface of the workpiece.

Sometimes the nails might get displaced and block the head of the gun. In that case, the jammed nail has to be removed before the machine can be used again.

Thank god for the tool-free jam release button, because this button does this hazardous task for you without you having to risk your fingers. Nail extraction is a dangerous task and you need to be careful even if you use the automatic jam release button.

If you want to switch between the modes of driving the nails, you can use the sequential or the contact operation modes. Just a click on the switch-trigger system, and you will be done changing up your nailing game.

There is an air exhaust portal fitted in the rear which opens up and cleans the machine as well the surrounding areas of the bits and pieces of materials that get scattered during the work.



8. DEWALT DCN660D1 Cordless Angled Finish Nailer Kit

If you love to be free with your life and your devices, then this cordless will make you fall in love with the task of nailing. It has a brushless motor, which is about 15% more efficient than a regular motor.

They waste less energy as heat and utilize most of their power in the actual operation of the machine. These motors work better and make the machine last longer as well.

So, although this is a device which entirely runs on batteries, you will be able to use it for a very long time without any compromises. However, the biggest advantage of this is that you will not need to use any gas, compressor or hose in order to run the machine.

Therefore, work will be more tolerable and a bit more fun now. If a nail gets stuck inside the nose of the nail gun, use the tool-free jam release to quickly clear out the block.

Use the release lever to reset the driver blade if something goes wrong while doing so. In case of the modes, you can switch from sequential to contact actuation and vice versa by the simple single-select trigger, which is a notable feature of this machine.

Also, owing to the angled head, this machine can easily get into the tricky corners of the workpiece and get work done in several types of orientations.

You will also find L.E.D. lights on the machine that help to light up dark corners and assist the user in his craftsmanship in the dark. There is an adjustable belt hook, which you can use to carry the machine by your side when you are traveling or moving around for work.



9. Valu-Air T64C 16-Gauge Finish Nailer 7/8-Inch To 2-1/2-Inch

This 16-gauge finish nailer is the most suitable for decorating trims, detailing furniture, casing windows and doors, pinning baseboards, paneling, molding and bedding. Using nails that range from 7/8 inches to 2-1/2 inches, this nail gun can go into severe work mode and complete tasks of huge proportions in no time.

The hose of the nail gun is made of aluminum, which is modified by heat and treated in a way that can handle rough work without getting damaged itself. It has a 360-degree adaptable deflector which pushes out air and other gases produced in the machine and keeps the machine working smoothly without any hindrance.

Another feature is that it needs oil to operate smoothly and this might be a problem for some people. The machine has a very big magazine, which can hold up to 100 nails of the specified range.

As with most machines, this one also comes with a tool-free depth adjustment system built-in. Set this up to the correct measurements before beginning to drive the nails. This is to make sure that neither the nails go too deep into the material nor will they be poking outwards too much.

Moreover, the tool-free depth adjustment system countersinks the nails very precisely, so that the nail head is flushed with the surface of the material andthus, ensures that no nail protrudes from the surface and causes a hindrance to the usage and appearance of the workpiece.

Additionally, the no-mar tips protect the surface on which the machine is kept. Sometimes due to rough handling or hurrying, the machine might scratch off the surface of the workpiece. This is going to be more disastrous if it happens while doing some decoration work.

When you buy this tool, you will get a carry-on case with it, inside which you will be able to find some hex wrenches, an air tool oil, and a strip of 16-gauge nails of about 2 inches.



10. DEWALT D51257K 1-Inch to 2-1/2-Inch 16 Gauge Finish Nailer

DeWalt is one of the most trusted brands when it comes to nail guns. This particular model comes with a sealed lube dual technology, which comes as an oil-free unit as well as an oiled lube unit.

Basically, with this, you will get the option of either working with the oil or without. The choice is yours. Moreover, it supports an operating pressure of 70 to 120 PSI, which provides the machine with a lot of versatility and makes it capable of handling gauge nails of any size.

Ideally, 16-gauge nails of 1 to 2-1/2 inches are used with this machine.

There are a lot of tool-free features of this machine, for example, an exhaust portal cap that rotates to an angle of 360 degrees, a nail-depth adjustment system which adjusts the hold on the nails, and a frontal opening on the machine that helps to unclog the nose of the gun by removing jammed nails.

All in all, this is the complete package of nailing that can be used for its great versatility and reliability.

The machine has no-mar pads that protect the surface on which it is kept, from getting scratches. There is also a sequential action trigger system installed into the device for fast nailing options. The whole package includes 1000 nails and safety glasses, for the benefit of the user.

Furthermore, all of this will come in a nice carrying case that can hold everything together and keep them safely in place. The machine weighs 7.6 pounds, and although this is not the lightest machine in the market, they are indeed one of the most powerful ones.

These machines are very good for doing semi heavyweight work. Using this machine is very easy since the usually tricky aspect of loading the nails on to the trigger is very smooth and comfortable with this machine.



11. Paslode – 902400 16 Gauge Angled Cordless Finish Nailer

Work with no breaks! If you are someone who gets in the flow of things and doesn’t like to take breaks in between, then this device will be extra helpful to you. The 7V lithium-ion battery can work relentlessly for a full day when it gets fully charged.

It can hold about 12,000 nails, which is ideal for long projects. We have read through many cordless finish nailer reviews in which this product was highly placed.

The device also boasts great precision in nail placement. It also has an angled magazine, which is critical in reaching difficult corners of the workpiece. If you have molding work or baseboards to fit into tight spots, then you can look into this model.

Weight of this machine is only 4.5lbs, which is pretty lightweight for a machine that can deliver such intensive power. Say goodbye to muscle fatigue because with this machine you will be working for hours without even realizing It.

Also, the light buzzing noise of the machine will actually do you good by making you tune into the work deeply. Maneuvering is simple. Since the machine doesn’t require a compressor, there is no need to carry an air hose around.

Additionally, the no-mar tips of these machines add to the flexibility and the comfort by protecting the surface of your workstation from getting scratched. This device is modeled by keeping versatility in mind.

You can work this machine for trim applications because of the amazing precision with which the nozzle takes control of the nails. Reach into any space or corner, angle the nozzle and once target is set, just shoot to securely put the nails into place.

Battery-driven devices are known to be less powerful than those that operate on electricity. However, the advantage here is that you will not be needing a hose, a compressor, and neither will you need to make additional expenses in the form of gas cartridges.

This is the perfect hassle-free deal for you if you are looking for a simple device that does not require much in order to deliver.



12. DEWALT DC628K XRP 1-1/4-Inch to 2-1/2-Inch 15-Gauge 34 Degree Angled Finish Nailer

This finish nailer is the one you are looking for in terms of design, power, and control. The motor of this nailer is so powerful that the user can easily work with both hard and soft joints with the same level of comfort. This nailer drills into materials of any varying degree of toughness, with calculation and consistency.

The machine supports two different types of modes- sequential and bump riding. Transition between the two can easily be made by activating a mode actuation switch on the body of the nail gun.

If you want a lot of precision, then use the sequential firing mode, whereas, if you use the bump operating mode then you will be able to finish a huge amount of work within a short time, since the bump mode is really about getting work done fast.

In case you are a carpenter, you will no doubt be needing to work with both types of firing, because of the range of uses that they offer to the user. It is a bumper when nails get jammed while working, isn’t it?

Well, due to the large number of nails inserted into the machine for greater efficiency in work, the nail jamming is something that is bound to happen.

However, with this machine, you will not be needing to fuss over this too much, because there is an in-built nail extraction method that can solve this problem by extracting the jammed nail without the use of any other tool or attachment.

When this machine is not in use, switch the contact trip button off, so that the trigger becomes disabled and the machine doesn’t go off at random times into unintended places accidentally.

Another feature is the LED lights. These lights are not installed in every machine. They provide extra assistance in places which are not too bright. Working in tight places can be tiresome and complex. If you have a light to assist you, then this will not be a problem at all.

Furthermore, the most amazing feature of this machine is that it has a 6-position dial, which allows you to change the nail size without having to adjust the depth measurement every time.



13. 3PLUS HT64SP 16-Gauge Straight Finish Nailer

This simple red and black nail gun can do just as much as any other in the market while being the most durable one of the lots. This machine weighs 6.3 pounds, which is not too light for a hand machine, it still is worth the buy. The machine works with nails that are 3/4 to about 2-1/2 inches of 16-gauge brad nails.

The main purpose of these machines that shoot brad nails is to finish simple crafty work liking hanging photo frames on the wall, finishing up some DIY projects and so on. These machines will, therefore, come in handy if you have a big house where there is usually a lot of nailing work to do.

It might be more profitable for you to purchase a nail gun and do the job yourself, instead of calling up a carpenter every time you need help.

Use the tool-free depth of drive system to adjust the hold of the gun according to the thickness of the nail, so the pressure of the motor is just enough to drive the nail flush into the material and not exert too much force on it, so as to damage the material.

If in doing so, a nail gets stuck into the nose cap, then you will have to remove it first in order to continue work. Doing that is very simple, as the gun comes with a nail extraction system.All you need to do is to press a button, and the jammed nail will be spat out of the machine in no time.



What to Look for Before You Buy

If you have gone through the list, you will have noticed that there is a lot of similarity between the different finish nail guns in the market. The reason is that there are some basic features without which the machine will be really difficult to work with.

So, before you buy one, make sure that all these features are present and properly functioning in the device of your choice. Read on to know what they are.

Weight and Size of The Machine

The only way you can use a finishing nail gun is by holding it with your hands. As you might be able to tell, the weight and size of such a device is a pretty important factor. Too heavy, and your hand will tremble, and the shoot will be misplaced. If it is too light, your hands will be swaying in the air with very little control and focus.

Thus, the target will be missed again. However, smaller devices are easier to work details with. A small tool can be taken into tight corners and used to nail but bigger tools will not fit the space and thus be rendered useless.

Corded devices are usually lighter than cordless ones. In cordless devices, the weight of the batteries adds to the weight of the machine.

You have to know what type of tasks you will most have to accomplish with your finishing nail gun. Then you can decide whether to go for the small or big and the corded or the cordless.

Tool-Free Features

The depth-of-drive, the exhaust portal, the nail adjustment system are all tool-free features built into the machine. Getting any of these tasks manually will be a lot of hassle for the user. In the market, most nail guns have these features.

When buying, make sure that you aren’t missing out on these. Also, test these controls out to see if they function properly, before finalizing the purchase, if possible.

Modes of Operation

Each of these modes is for particular styles of firing and must be used for getting the work done with the highest efficiency.

  1. Single-shot mode: This is the most basic type of firing. With one shot, it shoots one nail. That’s it.
  2. Bump firing mode: Use when you have to fire a lot of nails within a short period of time.
  3. Sequential firing mode: Turn this on to prevent the gun bump-firing and turn the safety tip on and set the trigger in a series to fire the first nail.
  4. Single actuation firing mode: Same as the sequential firing mode. But here, instead of setting up the trigger in a series, you can set it up in any random order you want.
  5. Full-Sequential Firing Mode: The trigger and safety tip should constantly be in activation so that all the shots are precise and accurate.

Integrated Duster

An integrated duster is useful because it cleans up the internal mess of the machine as well as the mess in the surrounding areas. During nailing, a lot of the workpiece will chip off and spread out across the area.

In that case, turn on the exhaust portal, so that the flow of air from the exhaust fan blows out the dust and debris from the area, leaving the workstation spotless and ready for more work to be conducted.


The reliability of the machine tells if the machine is durable or not. The body of some machines is made of aluminum, while some are made of magnesium. Both of these machines are very lightweight and do not add much to the weight of the machine. Thus, they stay in good condition for longer. 

Trigger Lock

The trigger lock-off function can be used conveniently to disable the trigger so that the machine is not a hazard to people in the instances when it is not being used.

Depth of Nail

If the pressure is not adjusted to the thickness of the nail, then the nail will enter the material by accident. 

Stuck Nails

If a nail gets stuck inside the machine, you will have to retrieve it before you can continue work. Now, you could do this by opening the machine and then getting the nail out manually.

However, in most machines, there is a nail extraction system installed into the device, which makes the task a lot easier for the user. Check if your machine has it.


Some machines have LED lights on them, which is very useful when working in small corners. The lighting helps to angle the nozzle of the machine and get full contact with the target area. So, if you are going to be working on very intricately detailed woodwork, then lighting is pretty much compulsory for you.

Also, if you are a carpenter, you might be called for work outside. It would help you to go to unknown places for work if you have a source of light with you.

Carrying Case

A carrying case is a great help when it comes to storing these devices with all their wires, or their batteries and attachments all in one place. Another thing the case does is that it protects the wires and the rubber grips on the handle from getting damaged by unprecedented rat attacks.

Top Rated Brands on The Market

There are numerous brands in the market that sell nail guns. However, some stand out because of customer satisfaction, some because of the quality of their machines. We have looked into many finish nailer reviews and studied through them extensively, to finally come up with this list.


This company makes nail guns that are very durable and dependable. They are so confident with the quality of their products that they offer a good 2 years of warranty with their machines. They are known for their ergonomics and framework. However, they are heavy machines which require to be charged every hour.


Freeman is a company that makes multifaceted tools which provide the best value for money in the market. They make nail guns which can switch between the different modes of firing without any hassle.

A wide range of attachments, for example, staples and nails also accompany this device. This is one of the brands that come up in discussions when people talk about companies who makes the best finish nailers for professionals and home users alike.


Amateur beginners swear by this company. They make pretty lightweight nail guns which are easy to use and handle by people with no prior experience in carpentry.

Also, these machines don’t need the occasional oil-rub either. Therefore, they are less hassle to deal with than the ones that are made to be used by experienced users.


If you are looking for simple tools to do simple crafts with, then this company might have a lot to offer you. This cheap finish nailer can do a lot – crafting, finishing, woodworking, setting up window and door trims, and so on.

These are not particularly suited for heavy work. But if you are a beginner or a home user, then you might want to buy a machine from them for practicing or getting lightwork done around the house. 


This company makes budget-friendly products for customers, which are affordable, lightweight and easy to handle. However, in order to get started, these machines require an air compressor. This causes a lot of noise and is rather an inconvenience for neighbors.

However, they are very easy to use and are able to yield surprisingly good results in the tasks they are assigned to. 

Frequently Asked Questions (FAQs)

Are nail guns dangerous?

There is a certain level of risk involved with any power tool you work with. Nail guns are no exception to that. The nails on these tools are very sharp and dangerous when not handled carefully.

So, whenever you are using these machines, make sure to wear proper eye protection. Maintain a safe distance from the gun and unplug the wire before going in to inspect any jammed nail or accumulated dust inside the device.

Battery-powered or electrical? Which gun is more suitable for heavy-duty work?

For light to medium work, go for the battery-powered one. For heavy-duty work, it’s best not to rely on the batteries, and instead to go back to the traditional system of electrically powering up the guns. 

Angled or straight nail guns?

For more versatility, it is better to use angled nail guns because they are more flexible in going to small corners and fixing the problem. However, straight nailed guns are more rigid and can only work on flat and big surfaces.

What do you mean by 16-gauge, 15-gauge, and so on?

Gauge is a measure of the diameter of the nail. The smaller the number, the bigger the diameter. And, big numbers mean that the diameter is small.

Which tool should I buy?

In order to know which one to buy, you have to know if you are going to do heavy- or light-work. You also need to know what kind of material you will usually be working with.

If you are a beginner, get a light-weight machine, and nails with a bigger gauge. If you are an expert, then you can buy any machine without hesitation.

Final Words

Finish nailing is very important when it is time to finally close the tab on a project. Since this is one of the last touches on the constructional work of a piece, you need to look for the best finish nailer that you can find in order to nicely put an end to the task.

So, we hope this article was helpful in providing you with some more knowledge into finish nail guns. Best of luck with the purchase!

Leave a Comment